HYBRID PV INVERTERS

SIMULTANEOUSLY MANAGES POWER FROM SOLAR PV, BATTERY, GRID, LOAD AND BACK-UP GENERATOR

THE MOST EFFICIENT AND ECONOMICAL SOLAR AND BATTERY SYSTEMS USE AN ALL-IN-ONE HYBRID PV INVERTER

All-in-one hybrid PV inverters combine a solar inverter, battery charger and back up generator input together with software which can be programmed to determine the most efficient use of your available energy.

Available in 2 configurations, Hybrid Inverter with Wind input and without Wind input in power classes of 3.6kW, 5kW, 8kW (Single Phase) and 12kW (Three Phase)

HYBRID PV INVERTER RANGE

BPE-HI-3.6kW      BPE-HI-5kW      BPE-HI-8kW      BPE-HI-12kW

BPE Hybrid Inverter 3.6kW & 5kW

BPE 3.6kW/5kW Hybrid Inverter

HYBRID PV INVERTER TECHNICAL FEATURES

Multiple Operating Modes

Battery only, Hybrid, On-Grid or Off-Grid

Simultaneously manages power to/from Solar, Wind, Battery, Grid, Load and Back-Up Generator

Programmable multiple operation modes: On-Grid, Off-Grid and UPS/EPS

Time of Use – 6 programmable time settings enabling you to use grid power more efficiently to charge the battery if you have cheaper electricity in the evening

12 Point Power Curve setting for wind (optional)

Excess Load Feature

Automatically diverts excess power to an immersion heater, air conditioning unit, EV Charger (or any appliance) based on PV and/or Wind generation and battery state of charge allowing you to save money on your energy bills

BMS

Compatible with BPE, LG, BYD, SolaX (LV) and Pylontech battery systems

RS485 or CAN bus Communication

Works with LiFePO4 and Lead Acid batteries to safely control charging parameters

Smart battery charger for optimised battery performance

BPE 8kW Hybrid Inverter

BPE 8kW Hybrid Inverter

Protection

Integrated DC Isolator Switch, PV input lightning protection, Overload/Over Temperature/Short Circuit Protection

Multiple Monitoring Modes

Wi-Fi, GSM, or LAN options available. Remote monitoring and control of devices with real time energy flows, charts, analysis and personalised settings

Colour Touchscreen Display

Large LCD touchscreen interface

Configurable AC/Solar battery charging  priority via LCD display

Configurable battery charging current and voltage based on applications via LCD display

Peak Shaving

When you setup Peak Shaving mode, the Hybrid Inverter will detect the limit you set from the grid and cap it

The loads will then be powered by Battery/PV/Wind/Back-up Generator

AC Coupling

Upgrade existing solar PV grid tied systems to a hybrid system by AC Coupling string/micro inverter AC power into the Hybrid Inverter

BPE Hybrid PV Inverter Diagram

BPE Hybrid Integration Diagram

Hybrid PV Inverter Technical Specification

Hybrid Inverter 3.6 kW, 5 kW, 8 kW Specification table

Follow BPE on Social Media

Keep updated with the latest news!